The Siemon Company LockIT - Manual (Page 2)

P
A
TCH CORDS, PLUGS AND CABLE
W W W . S I E M O N . C O M
P R O D U C T I N F O R M A T I O N
Outlet Lock
The LockIT ™ Outlet Lock fits securely into any standards compliant RJ45 outlet to block access to the port. It locks flush
within the outlet opening to provide a clean, attractive appearance without obstructing adjacent ports or protruding
beyond the outlet opening The outlet lock may be safely removed only by using the LockIT universal key.
Secure Patchcord
The LockIT Secure Patch Cord features a low-profile boot with an integrated lock. That prevents disconnection. The
cord can only be removed with the use of the LockIT universal key. The unique plug and boot design incorporates a
push-pull action which is based on Siemon’s BladePatch
® technology. This design provides excellent accessibility in
high density environments. The LockIT Secure Patch Cord is offered in 10G 6A ™ F/UTP, 10G 6A UTP, and category 6
UTP versions and is fully supported by applicable Siemon System Warranties.
The lock may now be removed and is
retained by the key to avoid dropping
The outlet lock simply snaps into empty
ports with no key required
Insert the universal key into the outlet lock
and rotate to unlock
Pull back on the boot to remove the patch
cord from the outlet
The secure patch cord is easily connected to
an available outlet — no need for a key or
tool
Insert the key into the lock from the rear to
unlock the plug