Selecting the sound enhancement (e.a.m.*), Selecting the sound enhancement – Toshiba SD-3980SC User Manual
Page 36
38
Advanced playback
3D*:
To obtain expansive virtual surround sound effects
from two speakers.
To use this enhancement on sounds output from
the ANALOG AUDIO OUT jacks, be sure to set
“Digital Output” to “PCM”.
* Effective in playback of a DVD video disc or a
VIDEO CD.
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch a preferred audio enhancement.
*E.A.M.: Enhanced Audio Mode
Selecting the sound enhancement
Press E.A.M.
The sound enhancement will
appear:
Press the E.A.M. button again, the sound
enhancement change to OFF.
1
To exit the audio enhancement selection
Leave the DVD video player unattended for about 5
seconds after having made a selection.
Notes
• Actual effects to sounds may vary depending on the
speaker system. Make selection according to your
preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD video player is connected to an amplifier
equipped with Dolby Surround Pro Logic, select “3D off”.
Otherwise, Dolby Surround Pro Logic may function
differently than usual.
E.A.M.
3D On