beautypg.com

Audio out select, Dynamic range control, Pcm down sampling – Toshiba SD-3750 User Manual

Page 54

background image

59

Function setup

Audio Out Select

DVD-V

CD

VCD

Select the output sound format corresponding to your
system connection.
For details of sound recording systems, see

43

.

Bitstream:

Select when connected to an amplifier
equipped with a Dolby Digital, DTS,
MPEG1 or MPEG2 decoder.

21 22

The DVD player outputs digital audio
information in the bitstream format
when you play a DVD video disc
recorded on the Dolby Digital, DTS,
MPEG1 or MPEG2 recording system.

PCM:

Select when connected to a 2 channel
digital stereo amplifier.

23

The DVD player outputs sounds in the
PCM 2ch format when you play a DVD
video disc recorded on the Dolby
Digital, MPEG1 or MPEG2 recording
system.

Note
When you make a connection to a TV, or Dolby Pro
Logic or stereo system via the analog audio jacks, select
“Bitstream” or “PCM.”

Dynamic Range Control

DVD-V

Off: Full dynamic range is maintained.
On: Dynamic range is reduced.

Notes
• This function works only during playback of Dolby

Digital recorded discs.

• The level of Dynamic Range Reduction may differ

depending on the DVD disc.

PCM Down Sampling

DVD-V

Make this selection only when you use your audio
equipment (e.g. receiver) connecting to the DVD
player via the BITSTREAM/PCM (DIGITAL) AUDIO
OUT jack.

According to performance of your connected receiver,
select a sound processing option for playback of a
disc that contains high frequency signals (sampling
frequency 96 kHz).

Off: Select when your connected receiver conforms

to high frequency signals of 96 kHz.
The DVD player outputs these signals in a disc
as they are.

On: Select when your connected receiver does not

conform to high frequency signals of 96 kHz.
The DVD player outputs these signals in a disc
depressing the frequencies to 48 kHz.

Notes
• Regardless of this setting, the DVD player outputs high

frequency signals in a copyright protected disc,
depressing to 48 kHz.

• If you select “Off” while your connected receiver does

not conform to high frequency signals of 96 kHz, you
cannot hear output sound of those signals.

Audio

Dynamic Range Control
Karaoke Vocal

Audio Out Select

PCM Down Sampling

Bitstream

Off

On
Off

AB C