Troy-Bilt 654J User Manual
Page 19
19
4.
Begin the removal the reverse tine belt as follows:
a. Apply pressure on the idler pulleys to relieve
tension on the reverse tine cable and the wheel
drive cable.
b. Carefully unhook each cable-end.
5.
Unloop the wheel drive belt from around the engine
pulley.
6.
Unloop the reverse tine belt from the engine pulley.
NOTE:
Replace the reverse tine belt first and the
forward tine belt second. Lastly, reattach the wheel drive
belt to the engine pulley or proceed by replacing it.
NOTE:
To install replacement belts, perform steps 1-6
in reverse order.
6
5
a
b
4
See also other documents in the category Troy-Bilt Gardening equipment:
- Pony (1 page)
- Pony (56 pages)
- Bronco (64 pages)
- Horse (44 pages)
- 634F--Bronco (23 pages)
- TB2450 (36 pages)
- 12190-3HP (28 pages)
- 13A-344-563 (21 pages)
- 830 (20 pages)
- TB230 (52 pages)
- 769-00425A (48 pages)
- 14049 (12 pages)
- TUFFY 630CN (32 pages)
- 52066 (28 pages)
- Mustang Colt ZT (1 page)
- 12068-7HP (68 pages)
- 634K--ProLine (32 pages)
- Mustang RZT (72 pages)
- 12235 (20 pages)
- 13028 (32 pages)
- 70 (24 pages)
- 640 (8 pages)
- TB110 (40 pages)
- 12209 (32 pages)
- 683-Horse (60 pages)
- 665B (36 pages)
- 540 (16 pages)
- 630C-Tuffy (32 pages)
- 52057 (24 pages)
- RZT 50 (36 pages)
- YM1500 (2 pages)
- TB475SS (82 pages)
- Tuffy 12155 (12 pages)
- 11A-436N063 (4 pages)
- 12227-3.75HP (32 pages)
- 466 (20 pages)
- 2-Cycle Trimmer TB32 EC (16 pages)
- Super Bronco (32 pages)
- 12217-3.5HP (36 pages)
- TB15CS (64 pages)
- TUFFY 630C (32 pages)
- TB2246 (36 pages)
- 12157 (24 pages)
- 68J-Horse (64 pages)
- 682 (44 pages)