Troy-Bilt 2100 - Manual (Page 10)

Ignition Key
Oil Fill
Primer
Gasoline
Cap
Electric
starter
Outlet Recoil
starter
Oil Drain
Choke
Control
Throttle
Control
Electric
starter
Button
Auger Control
Recoil Starter
Gasoline Cap
Chute Control Handle
Chute
Assembly
Shave Plate
Auger
Oil Fill
Figure 4-1
Choke Lever
Activating the choke control closes the choke
plate on carburetor and aids in starting
engine.
Primer
Pressing primer forces fuel directly into engine’s
carburetor to aid in cold-weather starting.
Ignition Key
The ignition key is a safety device. It must be fully
inserted in order for the engine to start. Remove the
ignition key when the snow thrower is not in use.
NOTE: Do not turn the ignition key in an attempt to
start the engine. Doing so may cause it to break.
RUN
MARCHE
CHOKE
VOLET DE
DÉPART
Throttle
The throttle control is located on the rear of the engine. It
regulates the speed of the engine and will shut off the engine
when moved into the STOP position.
Recoil Starter
The starter handle is used to manually start the engine.
Gasoline Cap
Remove the gas cap to add fuel.
Controls and Features
4
10