Technicolor - Thomson DVD Player + TV Set + VCR - Manual (Page 33)

33
Additional information
EN
Troubleshooting
The appliance does not switch on.
• Make sure it is plugged into a mains socket.
• Press the
button on the remote control or the ON/STANDBY button on the front of
the appliance.
The device switches off spontaneously.
• The device switches off automatically when it is in STOP mode for more than 30 minutes
without any user intervention. Switch it on again.
The remote control does not work or works only intermittently.
• Check that batteries are inserted or change them.
• Aim the remote control at the appliance. The infrared beam must not be blocked or
interrupted.
• Check that the remote control is configured to control the device you are trying to
operate with it. Press the DVD button if you want to operate the DVD player, the TV
button to operate a television set and the VCR button to operate the video recorder (see
pages 6 and 7).
There is no picture.
• Check you have switched on the TV set.
• Check the connections (see pages 4 and 5).
• Select the AV input assigned to the player on the TV.
• VCR - Try a different video tape. If the problem is solved, the problem may be caused by
the tape itself.
• VCR - Try to correct tracking using the and buttons to reduce the amount of
visible interference.
DVD
It is impossible to read the disc.
• Insert the disc with the printed side facing up.
• Check that the disc can actually be played by this device (see page 37).
• If you are trying to play a disc containing JPEG files, check that the files have a resolution
of less than 5 megapixels.
• Check that the disc’s regional code matches the player’s regional code.This player’s
regional code is 2.
• Clean the disc (see page 35).
The picture is of poor quality (with snow or lines).
• Check the connections (see pages 4 and 5).
There is no sound or the sound is of poor quality.
• Check the connections (see pages 4 and 5).
• It may be necessary to modify the setting selected for the
Digital Output option ( Sound
menu, page 31). If you have selected the DTS option, check that your player is connected
to a DTS decoder and that the disc you are trying to read is recorded in DTS format. If
one or other of these conditions has not been met there will be no sound or the sound
will be distorted.
DTH6100U_EN 18/07/03 13:46 Page 33