Technicolor - Thomson DVD Player + TV Set + VCR - Manual (Page 20)

Basic playback operations
20
EN
DVD
3. Press OPEN.CLOSE again to close the disc tray.
• Play starts automatically, or
• The disc menu appears. One of its options can be selected to start playing the disc. Select it
and press
ok , or else
• The player’s main menu appears. Select the option Play and press ok .
4. Press STOP to stop playback.
Notes:
The player stores the point where playback was interrupted. If you press PLAY again, playback resumes
from this point. To stop playback completely or to start again from the beginning, press STOP twice.
If the player is left in STOP mode for more than two minutes without any user interaction, a screen saver is
activated.
Accelerated play
While the disc is playing, press the REV or FWD button one or more times to vary the speed
and direction of the accelerated play.
Still image
While the disc is playing, press PAUSE once for freeze frame.
Note: After 30 seconds in PAUSE with no user interaction, the player goes into screen saver mode.
Frame advance
1. Press PAUSE twice.
FRAME is displayed.
2. Press the REV or FWD button a number of times to advance forward image by image.
Variable slow motion
1. While the disc is playing, press the PAUSE button once.
PAUSE is displayed.
2. Press the REV or FWD button a number of times to vary the speed and direction of the
slow motion.
Changing chapter
While the disc is playing, press the or button to go immediately to the next or previous
chapter, or to the next or previous track.
Zoom
1. While a disc is playing, press the ZOOM button until you reach the zoom size you require.
2. Move from one area to another using the , , and buttons.
Scene replay (DVD)
While the disc is playing, press the AGAIN button on the remote control to replay the last
seconds of the film or sequence shown.
DTH6100U_EN 18/07/03 13:46 Page 20