TechniSat 1 User Manual

Page 26

Use the

green

function key to select the programme list in which you wish to block

one or more programmes (Point 7.1.1).

Press the

blue

function key (edit mode).

Now use the

arrow up/down keys

to mark the programme you wish to block.

Now press the

green

function key to select the function

Parental control

The symbol

P18

will appear next to the programme selected.

Repeat this procedure as often as necessary until all programmes you wish to block
have been marked.

When you have completed configuring the programme list according to your preferen-
ce, press the

Back

key twice to return to normal operation.

In order to activate the parental control feature, you must still enter your personal PIN
number under the following point

Change PIN

Then you must switch on the

parental control feature as described in

Point 5.2 (Basic Settings)

7.2 Changing the PIN

The PIN number is set at the factory to

0000

in order to activate the parental control fea-

ture, you must enter a personal PIN number in place of the factory setting.

Please note! Do not forget your PIN number. If you do forget it, please con-

sult your retailer or serviceman!

In order to change the PIN number, proceed as follows:
>

Press the

key to call up the

Main Menu

Use the

arrow up/down keys

to mark the line

Settings.

Confirm by pressing

The sub-menu

Settings

will be displayed.

Use the

arrow up/down keys

to mark the line

Change PIN

Confirm by pressing

Now use the

numeric keys

to enter the current PIN number (factory setting 0000).

Now use the

numeric keys

to enter the desired new personal PIN number.

Repeat this entry.

When you have completed entering the PIN number in this manner, press the

Back

key twice to return to normal operation.

Please note that the parental control feature must still be activated as described in Point 7.3.

7.3 Cancelling blocking of individual programmes

In order to remove the parental control feature for individual programmes, proceed as in
Point 7.2. After entering your personal PIN number, select the desired programme, and press
the

key to remove the control feature.

When you have completed configuring the programme list according to your preference in
this manner, press the

Back

key twice to return to normal operation.

7.4 Programme Search

As mentioned before, your receiver is pre-programmed to receive signals from the ASTRA
and EUTELSAT satellites. In order to receive new programmes, or other satellites, there are
various options of searching fro programmes by means of a programme scan.

1. Satellite:

All

, in order to scan all satellites selected in the menu LNB Settings (Point 5.4) for

available programmes

Satellite

, in order to scan only the selected satellite for programmes or bouquets

DIGIBOX1_englisch.qxd 26.09.01 09:55 Seite 26