TechniSat 1 User Manual

Page 20

6.11.2 Programme preview for next few days

In as far as this is provided by the broadcaster, you can use the

arrow right key

to dis-

play information relating to the programme for the next few days, for the current channel.
Press the

arrow left key

to return to the previous table of information.

6.11.3 EPG Information

In as far as this is broadcast, you can use the EPG function to obtain information on the con-
tent of various programmes:
>

Mark the relevant programme by means of the

arrow up/down keys

Press the

EPG

key in order to display the information.

You can scroll through lengthy texts with the aid of the

arrow up/down keys,

and

you can page through them with the aid of the

arrow left/right keys.

Press the

Back

key to return to the previous table of information.

6.11.4 Switching EPG off

Press the

Back

key to return to normal operation.

6.12 Timer

Your receiver is equipped with a timer. This allows you to make video recordings even in
your absence Timer operation is indicated by a blinking light on the LED display. Timer ope-
ration can be switched off by pressing the

On/Standby

key.

In order to programme the timer, proceed as follows:

6.12.1 Programming via EPG:

Select the channel on which the programme to be recorded is broadcast.

Press the

EPG

key.

The EPG table of the selected channel will be displayed.

Use the

arrow up/down keys

to mark the selected programme.

Press the

yellow

function key (Record).

The data relating to the selected programme will be taken over into the timer memory,
and will be displayed on screen for control purposes.

DIGIBOX1_englisch.qxd 26.09.01 09:55 Seite 20