Technicolor - Thomson MS2200 - Manual (Page 11)

This unit is compatible with
CD-RW/ CD-R discs for
playback.
Loading Discs
1. Press SOURCE repeatedly to select CD mode.
2. Press OPEN•CLOSE
to open the drawer.
3. Insert up to five discs with label face up. (Press
DISC SKIP to rotate the disc carrier.)
4. Press OPEN•CLOSE to close the drawer.
Loaded disc position icon lights.
Playing Discs
• Press PLAY/PAUSE to begin or pause
playback.
• Press STOP to stop play.
Play and Load Simultaneously
1. Press OPEN•CLOSE to open the tray while
a CD is playing
2. Load/change discs for available trays by
pressing DISC SKIP.
3. Press OPEN•CLOSE to close the tray.
Skipping a Disc
Press DISC SKIP to skip to the next disc.
Skipping Tracks
Press SKIP BACKWARD or SKIP
FORWARD
to skip to the previous or next
track on the disc.
Searching Through a CD
Press and hold SKIP BACKWARD or SKIP
FORWARD to search through a CD while it is
playing.
Random Playback
Press / PTY to turn on/off the playing of
tracks in random order. (Remote Only)
7
EN
CD Player
CD-R / RW
Notes on CD-R/RW Disc:
• Do not affix any type of labels to either
side (recordable or labeled side) of a
CD-R/RW disc as this may result in the
unit malfunctioning.
• To avoid damages to the CD-R/RW disc, do
not open the disc compartment door while
the disc is being read.
• Do not load an unrecorded CD-R/RW disc
into the unit. This may take a longer time
to read the disc.
• Playback capability for CD-RW discs
may vary due to variations in the
quality of the CD-RW disc and the
recorder used to create the disc.
Note:
Be sure to remove all discs from the disc
compartment before moving or transporting
the unit!
MS2200 EN 11/17/03 1:59 PM Page 12