Traveler AS-TV8 User Manual

Page 18

4. Press the Down button to display a lower numbered channel.

5. Press the SET button to activate the selected channel.

E. LCD Indications:

1. :Three bars means batteries are fully charged.

2. :One bar indicates low batteries. Replace or recharge the
batteries.

3. :No bars showing indicates batteries are exhausted and after
flashing three times the power will automatically shut off.

F. Battery Charging Steps:

1. Rechargeable batteries need to be NiMH AA 1.2V with an amperage of
2100mAH or less as the charging function is limited to batteries of that
rating.

2. Recharging is best accomplished by using the AS-TV8DCC charger

3. Charging status:

a. Battery indicator flashing: Non-Rechargeable batteries installed or
no batteries installed. Check the batteries.

b. Battery indicator is flashing and LCD backlight is on: Failing,
corroded, or over-temperature batteries.

c. One or two bars showing: Batteries are charging successfully.

d. Three bars showing: Batteries have been fully charged.

* Please note the microphone will be turned off automatically while it is being
charged.