Triax TR 305 - Manual (Page 29)

29
DIGITAL TERRESTRIAL RECEIVER
Menu Guide
10. Menu Transparency
From 20 to 63 will give the variable transparency on Video
and OSD screen.
Select an menu blending ratio and press OK button.
The transparency will be applied on the screen.
11. Change PIN Code
From here you can change the PIN code from the standard 0000. DO NOT
FORGET IT! Without it, you are not able to access to any of the functions where
the code is required.
You can change password for Parental Lock and Receiver Lock simultaneously.
1. Input the current PIN code using NUMERIC button on the remote control.
2. In the highlighted new PIN code, input a new PIN code.
3. To verify the new PIN code, re-enter a new PIN code in the highlighted
confirm PIN code.
If the
PIN Code is correct, the message "Success" will be displayed on
the display window.
Note If you forget the PIN code, press the RGYB(Color) button in sequence.
(i.e. Red -> Green -> Yellow -> Blue button)
The PIN code will be changed to "0000"
12. Parental Lock
When you change "Parental Lock" to "On" or "Off", service channel can get or
not from that set values. If you select "On", you may need PIN code every time
you select the lock channel program as you set in the channel control.
If you select "Off", you can see all channels without PIN code.
System Setting