Texas Instruments TPA102 MSOP - Manual (Page 8)

Features
1-2 Introduction
1.1 Features
The TI TPA102 MSOP audio amplifier evaluation module and the TI
plug-n-play audio amplifier evaluation platform include the following features:
- TPA102 MSOP stereo audio power amplifier evaluation module
J Dual channel, single-ended operation
J 150 mW output power into 8
Ω
at 5 V
J 2.5-V to 5.5-V operation
J Very low distortion — THD+N is less than 0.01% at 1 kHz and less than
0.03% from 20 Hz to 20 kHz into 10-k
Ω
loads, less than 0.02% at 1 kHz
and less than 0.4% from 20 Hz to 20 kHz into 32-
Ω
loads, and less than
0.05% at 1 kHz and less than 0.8% from 20 Hz to 20 kHz into 8-
Ω
loads
J Extremely low current consumption in shutdown mode
J Internal thermal and short-circuit protection
J Internal pop reduction circuitry
- Quick and easy configuration with the TI plug-n-play audio amplifier
evaluation platform
J Evaluation module is designed to simply plug into the platform,
automatically making all signal, control, and power connections
J Platform provides flexible power options
J Jumpers on the platform select power and module control options
J Switches on the platform route signals
J Platform provides quick and easy audio input and output connections
- Platform power options
J Onboard 9-V battery
J External 5-V – 15-V (V
CC
) supply inputs
J External regulated V
DD
supply input
J Socket for onboard 5-V V
DD
voltage regulator EVM
J Onboard overvoltage and reverse polarity power protection
- Platform audio input and output connections
J Left and right RCA phono jack inputs
J Miniature stereo phone jack input
J Left and right RCA phono jack outputs
J Left and right compression speaker terminal outputs
J Miniature stereo headphone jack output