beautypg.com

Starting up the recorder, Turning the power off, Basic setup – Toshiba RD-XS32SC User Manual

Page 26

background image

26

After all the necessary connections,

• Turn on the equipment connected to the

recorder.

• Select the corresponding video input on

your television.

Perform these selections whenever you operate
the recorder.

Turning the power on

Press the ON/STANDBY button from the remote
control or on the front panel of the recorder.

When the power turns on, the ON/STANDBY indicator
changes color from red (standby mode) to green
(operation).
After a few seconds, a startup screen appears.

The following icon will appear on the top right corner
of the screen. The icon will continue flashing
momentarily.

While the icon is flashing, the recorder is checking
the status and reading data of the HDD and the
DVD drive for startup. If the DVD drive does not
contain a disc, the recorder consumes less time to
startup, because it does not need to read data
from the DVD drive.
While the “Loading” icon is flashing, the recorder
cannot respond to any operations of buttons other
than CHANNEL and INPUT SELECT. Operate all
other functions after the icon has disappeared.

Note
• When the recorder is turned on for the first time, the

following menu will be displayed after the “Loading” icon
has disappeared. See “A: Initial settings” (

page 28).

Turning the power off

Press the ON/STANDBY button from the remote
control or on the front panel of the recorder.

The “Unloading” icon appears on the right corner of
the top of the screen, and the ON/STANDBY indicator
turns red. Then the power turns off.

Note
• If the recorder freezes for about 15 minutes and will not

respond to any buttons, holding down the ON/STANDBY
button on the front panel for about 10 seconds can force
the recorder to turn off. However, this is an emergency
measure, which contains a risk of damage to data or discs.
Avoid casual use of this measure. If you try this while the
recorder is operating properly, especially while the
“Loading” or “Unloading” icon is flashing, it may result in re-
initialization of the HDD.

Basic Setup

Starting up the recorder

Loading

e.g.

LIBRARY

REC MENU EDIT MENU

CONTENT MENU

EASY

NAVI

ANGLE

OPEN/CLOSE

SUBTITLE

AUDIO

CHANNEL

INSTANT SKIP

INSTANT REPLAY

TOP MENU

MENU

RETURN

DVD

TIMESLIP

HDD

DVD

SK

IP

S

LO

W

ON/STANDBY button

ON/STANDBY indicator

ON/STANDBY button

SETUP

e.g.

TV/Cable
Channel setting

TV

Initial settings

Set Top Box setting

Guide channel setting

Language

English

Time & Date setting