Toshiba RD-XS32SC - Manual (Page 16)

16
Connecting to cable TV signal
Choose one of the below according to your usage of the cable box.
For watching received channels, connect to the TV via the audio/video cable.
Connections
This set-up will allow you to:
– record an unscrambled channel.
– record an unscrambled channel while watching
another (only when you connect a cable-compatible
TV).
You will need to:
• to record a channel while watching another, select a
desired channel on the TV (only when you connect a
cable-compatible TV).
This set-up will allow you to:
– record an unscrambled channel.
– record an unscrambled channel while watching
another (scrambled or unscrambled).
You will need to:
• set TV channel to the output channel of the cable box.
• to record an unscrambled channel while watching a
scrambled channel, select a desired cable channel via
the cable box.
This set-up will allow you to:
– record any channels through the cable box.
You will need to:
• set “Cable Box/DBS” of “Set Top Box setting” to
“C.Box”. page 37
• set “Select input” of “Set Top Box setting”to “3CH” or
“4CH”. page 37
• select a desired cable channel via the cable box.
• while the recorder is turned off, set TV channel to the
output channel of the cable box.
You can control cable channels from the recorder.
Preform the below.
1) Connect the supplied IR cable to the CHANNEL
CHANGE IR jack of the recorder. page 19
2) Set “IR control” of “Set Top Box setting” to “On”.
page 37
Incoming cable
Incoming cable
Incoming cable
Cable box
Cable box
IN OUT
IN OUT
R
R
RF OUT
(TO TV)
RF IN
(FROM ANT.)
IR
CHANNEL
CHANGE
VHF / UHF
RF OUT
(TO TV)
RF IN
(FROM ANT.)
I
CHANNEL
CHANGE
VHF / UHF
3CH
4CH
VIDEO L R
R L VIDEO
S-VIDEO
S-VIDEO
INPUT1
INPUT3
RF OUT
(TO TV)
RF IN
(FROM ANT.)
IR
CHANNEL
CHANGE
VHF / UHF
3CH
4CH