Tiger Droid Fighter - Manual (Page 6)

6
HOW TO OPERATE
1.Turn ON the ships by sliding the ON/OFF switch to
the ON position.
2.The blaster trigger is located in the handle of the
joystick.
3.To emit a single invisible infra-red burst, press and
release the blaster trigger once.
4.To activate the Forcefield™ feature, press the Forcefield
4. Slide part “B” on the top of the joystick handle into
the position marked “B”. The part must snap into
position before proceeding with the next step.
5. Slide part “C” on the top of the joystick handle into
the position marked “C”. The part must snap into
position before proceeding with the next step.
6. Slide part “D” on the top of the joystick handle into
the position marked “D”. The part must snap into
position before proceeding with the next step.
NOTE: If a part does not snap into position correctly,
remove the part and slide it into the correct
position again. Do not force a part into position –
the part must slide smoothly into place.