beautypg.com

Before recording, Listening to a cassette tape 2 – Teac LPR500 User Manual

Page 24

background image

24

Listening to a Cassette Tape 2

A

To stop playback

Press the STOP button (H) during playback to stop.

B

To pause playback

Press the PAUSE button (J) during playback .
Press the button again to start playback again.

< To enter PAUSE mode at the current position, order of pressing

the PAUSE button first and then pressing the PLAY button is
required in the STOP mode.

C

Fast-forwarding/rewinding

Press the F.FWD or REW button (,/m) to fast-forward or
rewind a tape respectively.

To stop fast-forwarding or rewinding, press the Stop button (H).

Never press the PLAY button (y) and REW button (m) at
the same time.

When a tape is fast-forwarded or rewound to the end, make
sure to press the STOP button (H) to stop the function.

Before you start recording, make sure that you understand
the following points:

< CD specifications limit the number of tracks to 99.

< You can not create recording tracks shorter than 10 seconds.

< Once you have recorded on a CD-R disc, the data cannot be

erased.

< A recorded CD-R can be played back in a regular CD player after

finalizing.

< To add more recordings to a finalized CD-RW, unfinalize it. (See

page 29.)

When all available space on a CD-RW has been recorded, you can

record additional tracks by erasing previously recorded tracks.
Note that you can only erase all tracks or the last track.

< If the STOP button (H) or PLAY/PAUSE button (y/J) is pressed

within 10 seconds from the beginning of recording, the unit does
not stop recording.

< When the recording is finished, “REC” and “- ENd - ” blink for a few

seconds, and the unit then goes into stop mode. Do not apply
any shock or vibration to the unit during blinking.

< If the disc reaches the end during recording, the unit finalizes the

disc automatically and stops.

< If the disc reaches the end of the 99th track during recording, the

unit finalizes the disc automatically and stops.

< The recording time of a track may differ slightly from the original

one.

< When a partially recorded disc is inserted, recording starts after

the last recorded track.

< The AUTO REC function automatically divides a track according

to the sound level that has been set (See page 25). Therefore it
is possible when using this function that a finished copy could
have more tracks than its original source. It would be caused by
extremely quiet part or noisy part.

< When the TRACK INCREMENT button is pressed while recording,

the recorded sound will be cut for a moment.

Do not use the TRACK INCREMENT function while the music

sound continues.

< When the disc which was recorded by this unit is played back by

some other players, a small noise may be heard at the point that
the track is divided.

Before Recording

This manual is related to the following products: