Topcom BUTLER 2410 C - Manual (Page 4)

4
1 INSTALLATION
Before you use the telephone for the first time, you must first make sure the battery is charged
for 20 hours. If you do not do this, the telephone will not work optimally.
• Open the battery compartment (see below).
• Insert the batteries respecting the (+ and -) polarity.
• Close the battery compartment.
• Leave the handset on the base unit for 20 hours. The Line/Charge indicator
(LED) on
the base unit will light up.
Battery indicator:
•
The battery is fully charged.
• The battery is half drained (50%)
• The battery is low. When the battery is low, you will hear warning signals and the
battery symbol on the display will blink.
Butler 2410C
4 4 4 4 4 4 4 4 4 4
+ -
- +
HANDL. B2410_C.qxd 19/6/02 11:37 am Pagina 4