Toshiba STRATA CTX DKT3000 - Manual (Page 61)

Advanced Operation
Speed Dial
Strata CTX DKT3000/2000-Series Telephone 05/02
47
Speed Dial
Speed Dial enables you to dial a sequence of up to 32 digits with a shorter code. Dial
sequences can include telephone numbers, authorization codes, passwords feature
activation codes and pauses. Speed Dial may be used to originate a call or invoked
after a call is established. There are two types of Speed Dial:
• Station – Your CTX System Administrator allocates a block of up to 100 personal
speed dial numbers in increments of 10 per telephone. You can create and change
these numbers from your own telephone. You have exclusive use of them. If you
have a DKT3014 large display telephone and want your named station speed dial
numbers to appear on the display, see your CTX System Administrator.
• System – All telephones in your system can share a list of up to 800 System Speed
Dial numbers under the exclusive control of the CTX System Administrator. In
some cases, System Speed Dial will allow you to reach numbers that you would
not be allowed to dial directly from your telephone.
Making a Call Using Speed Dial
There are three ways to begin a Speed Dial Call.
1. Dial
...or press 6SGLDO on a DKT3000-series telephone
...or press the 6SHHG 'LDO feature key on any DKT.
2. Dial the Station or System Speed Dial Number. Station Speed Dial numbers
occupy numbers 100~199. System Speed Dial numbers occupy numbers 200~999.