Using your lawn mower, Using as mulcher, Using grass catcher – Troy-Bilt TB110 User Manual

Page 15

ection

5 — o

peration

Using Your Lawn Mower

Be sure lawn is clear of stones, sticks, wire, or other objects

which could damage lawn mower or engine. Such objects could

be accidently thrown by the mower in any direction and cause

serious personal injury to the operator and others.

WARNING:

The operation of any lawn mower can

result in foreign objects being thrown into the eyes,

which can damage your eyes severely. Always wear

safety glasses while operating the mower, or while

performing any adjustments or repairs on it.

Using as Mulcher

For mulching grass, remove the grass catcher and allow the rear

discharge door to close the rear opening of mower. For effective

mulching, do not cut wet grass. If the grass has been allowed to

grow in excess of four inches, mulching is not recommended. Use

the grass catcher to bag clippings instead.

Using Grass Catcher

You can use the grass catcher to collect clippings while you are

operating the mower.
1.

Attach grass catcher following instructions in the

“Assembly & Set-Up” section. Grass clippings will

automatically collect in bag as you run mower. Operate

mower till grass bag is full.

Stop engine completely by releasing the blade control.

Make sure that the unit has come to a complete stop.

Lift discharge door and pull grass bag up and away from

the mower to remove the bag. Dispose of the grass

clippings and reinstall the bag when complete.

WARNING:

If you strike a foreign object, stop the

engine. Remove wire from the spark plug,

thoroughly inspect mower for any damage, and

repair damage before restarting and operating.

Extensive vibration of mower during operation is an

indication of damage. The unit should be promptly

inspected and repaired.