Teac TD-X250I - Manual (Page 21)

21
To check the programmed order
In the stop mode, press the MEMORY button repeatedly. The
track number and program number will be shown on the
display.
To add a track to the end of the program
In the stop mode, press the MEMORY button repeatedly until
“00” appears on the display. Select a track number using the
Skip button (. or/ ) and then press the MEMORY
button. The track is added to the end of the program.
To overwrite the program
In the stop mode, press the MEMORY button repeatedly until
the program number to be changed appears on the display.
Select a new track number using the Skip button (.or/)
and then press the MEMORY button.
To clear program
To clear the programmed contents, press the MEMORY and
the STOP button (H) in the stop mode.
< If one of the following buttons is pressed, the programmed
contents will also be cleared:
OPEN/CLOSE, FUNCTION, FM/AM, STANDBY/ON
< If the unit is disconnected from the power supply, the
programmed contents will be cleared.