Topcom Skyr@cer 544 User Manual
Page 24
24
Skyr@cer Access Point 544
ENGLISH
4.2.3. IP SETTING
This is the page where you configure the IP settings for the Access Point.
Please also refer to Appendix B to learn more about Network and IP address.
Click “
Apply
” button for any changes made to be effective. The utility program will prompt you for
user name and password for security protection.
4.2.4. WEP SETTING
This is the page that allows you to configure the WEP settings for the Access Point.
Enable WEP Key
security by clicking
“Data Encryption”
.
Select “Fixed IP
Address” and enter the
IP address of the
Access Point and
Gateway.
Select
“DHCP Client”
if
there is a DHCP server
assigning IP addresses
on the network.
[email protected] Page 24 Wednesday, February 12, 2003 3:19 PM