Top Innovations MC1227 - Manual (Page 9)

9
A
SSEMBLY
I
NSTRUCTIONS
ATTACHING SQUEEGEE /
LARGE UTILITY BRUSH
NOTE: While only the Squeegee is
illustrated in FIGURES 5-7, the same
assembly procedure applies to the
Large Utility Brush.
1. Attach Squeegee or Large Utility
Brush to Utility Attachment Head by
inserting tabs on bottom of Utility
Attachment Head (FIGURE 5-A)
into slots on bottom of Squeegee or
Large Utility Brush (FIGURE 5-B).
2. Swing Squeegee/Large Utility Brush
backwards until hook latch on back
snaps over tab on top of Utility
Attachment Head (FIGURE 6).
3. Slide Utility Attachment Head with
attached Squeegee/Large Utility
Brush onto Steam Jet Nozzle as
illustrated (FIGURE 7).
FIGURE 5
FIGURE 6
FIGURE 7
ATTACHING FABRIC
STEAMING CLOTH
1. Stretch Fabric Steaming Cloth
around Utility Attachment Head as
shown (FIGURE 8).
2. Slide Utility Attachment Head with
attached Fabric Steaming Cloth
onto Steam Jet Nozzle.
FIGURE 8
Top Innovations, Inc.