Top Innovations MC1227 User Manual

Page 12

OPERATING HANDHELD STEAM CLEANER

NOTE: Be sure that Water Reservoir has already been filled and desired
attachments are connected before following these steps.

1. Plug power cord into a convenient electrical outlet. Steam Ready Light
will immediately illuminate. (Note: Steam Ready Light is illuminated
while boiler is heating. This unit has no On/Off power switch.)

CAUTION: This unit uses a grounded (3-prong) electrical plug. Use only in
properly installed 3-prong electrical outlets. Do not attempt to alter plug or
circumvent this safety feature in any way.

2. Steam Ready Light will deactivate in 3-4 minutes, indicating that
boiler is heated and Handheld Steam Cleaner is ready to begin steaming.

3. Direct Steam Jet Nozzle (and any attachments) towards surface you
desire to steam, and press Steam Trigger.

CAUTION: Always be sure that Steam Jet Nozzle and any other attachments
are pointed in a safe direction (away from yourself, other people, pets, and
plants) before pressing Steam Trigger.

4. Keep Steam Trigger Depressed for a constant stream of steam. Using a
slight back-and-forth motion over the area you are steaming will further
enhance the cleaning process.

NOTE: During use Steam Ready Light may illuminate. This is normal. If you
notice a drop in steam pressure, release Steam Trigger until Steam Ready Light
deactivates once again.

5. Once steaming task is complete, immediately unplug power cord from
electrical outlet. Follow steps under Proper Storage procedure on page
13 of this manual.

Top Innovations, Inc.

SING THE

ANDHELD

TEAM

LEANER