beautypg.com

Specification – Toshiba CSB1100CL-10 User Manual

Page 8

background image

2

D4134040A

5. Specification

Model

CSB1100CL-10

Image sensor

CMOS Image sensor

Total pixel

1280 (H) x 1024 (V)

Active pixel

1240 (H) x 1023 (V)

Pixel size

6.7 (H) x 6.7 (V) micro m

Image area

8.308 x 6.854 mm

Driving frequency

33.3333MHz

Scanning line

1023 lines

Scanning system

Progressive

Flame rate

22.2 fps

(Under Rolling shutter mode and all pixel’s data read out mode)

Sync system

Internal

Aspect ratio

5:4

Subject illumination

2600 lx, F5.6 (3100K)

(Exposure time: Approx. 16 ms)

Video output

Camera link (LVDS, 10bit, Pixel clock 33.3333MHz)

S/N

47 dB (p-p) / rms

(Exposure time: Approx. 16 ms)

Control signal

Refer to COMMAND table

Gamma

1.0 Fixed

Electronic shutter

Shutter speed setting by any given timing through Camera Link communication command.

Shutter mode

Global shutter

Random Trigger Shutter

RTS operation is available by external trigger signal IN. Shutter speed preset or shutter
speed control by pulse width is available.

The exposure starts at shutter trigger rising edge and ends at shutter trigger falling edge
under pulse width control for shutter speed.

Power source

DC12V +/- 10% (Source ripple level 100mV(p-p) or less)

Power consumption

Approx. 1.4W

Ambient condition

Temperature:

(Performance guaranteed) From 0 through 40 degrees Celsius

(Operation guaranteed) From -10 through 50 degrees Celsius

(Preservation) From -20 through 60 degrees Celsius

Humidity:

(Performance guaranteed) From 20 through 80 % (No condensing)

(Operation guaranteed) From 20 through 80 % (No condensing)

(Preservation) From 20 through 95 % or less (No condensing)

Lens mount

C-mount

Flange back

17.526 mm

External dimension

44 (W) x 29 (H) x 52 (D) mm

(Without projection)

Weight

Approx. 120 g

Electro-Magnetic Compatibility

(1) EMI(Electro-Magnetic Interference)

EN50081-2(EN55011-A) adaptation

(2) EMS(Electro-Magnetic Susceptibility) EN61000-6-2 adaptation

* Please contact our sales person about interface specification.