Toshiba MW27F51 - Manual (Page 19)

19
Basic setup
Press POWER.
The starting setup function begins and the
Language setup menu appears on the screen.
Press
or to select your desired language,
then press ENTER.
Starting setup
The STARTING SETUP function makes installing your unit easily. It leads you
the Language selection, TV/CABLE selection and auto channel memory
automatically.
IMPORTANT: Make sure that the antenna or cable TV system connection
is made!
Starting setup
Press or to select “TV” or “CABLE”, then
press ENTER.
Press or to select “START”, then press
ENTER.
If you select “CANCEL” and press ENTER, the
STARTING SETUP stops and changes to the TV
screen.
1
2
3
Now the “AUTO CH MEMORY” and “AUTO
CLOCK”starts.
After the starting setup is completed, the TV
channel appears on the screen. 4
Notes:
• The starting setup function will work only when you press
POWER for the first time.
• In “AUTO CLOCK” setting, it may take more than 10 minutes
to read the EDS signal for one channel, which has only “Time
of day” or “Local time zone”.
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
CHANNEL PLAN
TV
CABLE
AUTO SETUP
START
CANCEL
AUTO CH MEMORY
STOP : CANCEL
AUTO CLOCK
STOP : CANCEL
POWER
/
ENTER
Basic setup
5T80101B [E]p19-22 3/8/05, 9:55 AM 19