beautypg.com

Т³гж 5, Chapter 3: identifying external components, Gigabit ethernet switch user's guide – TP-Link Gigabit Ethernet Switch TL-SG1008 User Manual

Page 5: 1 front panel, 2 rear panel, 3 led indicators

background image

5

6

TL-SG1008/TL-SG1016/TL-SG1024

Gigabit Ethernet Switch User's Guide

TL-SG1008/TL-SG1016/TL-SG1024

Gigabit Ethernet Switch User's Guide

Chapter 3: Identifying External Components

This Chapter describes the front panel, rear panel and LED indicators of the

Switch. TL-SG1008/TL-SG1016 and TL-SG1024 just differ in the number of

LED indicator and port, all figures in this guide are of TL-SG1024.

3.1 Front Panel

The front panel of the TL-SG1024 consists of switch LED indicators, 24

10/100/1000Mbps RJ-45 ports.

Figure 3-1 TL-SG1024 Switch Front Panel sketch

3.2 Rear Panel

The rear panel of the TL-SG1024 only features a power receptacle, which is

an AC power receptacle. Connect the female of the power cord head here,

and the male head to the AC power outlet.

Figure 3-2 TL-SG1024 Switch Rear Panel sketch

3.3 LED indicators

The LED indicators include Power, FAN, Link/Act, 1000Mbps and 100Mbps

LED indicators, which are used for monitoring and pre-troubleshooting of the

Switch. The following section shows the LED indicators for the Switch along

with an explanation of each indicator.

Figure 3-3 TL-SG1024 Switch LEDs sketch

×

Power LED: This indicator will light solid red when the Switch powers

up. If the LED is not lit, please check the power supply and connection.

×

FAN LED: IF the fan is working well when the Switch is running, the

corresponding LED indicator will light solid green (only for TL-SG1024).

×

LINK/ACT LED: The LED indicates Link/Active status. It flashes green

when data is being transmitted or received on the working connection.

×

1000M LED: The corresponding gigabit port LED indicator will light

solid green when connected to a 1000Mbps device.

×

100M LED: The corresponding gigabit port LED indicator will light solid

green when connected to a 100Mbps device.

Note: When connected to a 10Mbps device, both the 1000Mbps and the

100Mbps LED indicators are unlit.

TL-SG1024

1000Mbps

1000Mbps

100Mbps

100Mbps

Power

Power

FAN1

FAN1

FAN2

FAN2

24-Port Gigabit Switch

3

3

5

5

7

7

2

2

4

4

6

6

8

8

11

11

13

13

15

15

10

10

12

12

14

14

16

16

19

19

21

21

23

23

18

18

20

20

22

22

24

24

9

9

17

17

Link

Link
Act

Act

110-260V~ 50-60Hz 0.6A

Power

FAN1

FAN2

Link
Act

This manual is related to the following products: