Telenetics MIU/PowerPort Series 28.8 - Manual (Page 15)

MIU Installation, Operation & Diagnostics Edition: January 25, 1999 Page 13
13. MODEM CONFIGURATION
Telenetics dial and leased line modems are based upon Rockwell chipsets.
These chipsets contain Rockwell’s “AT” command set.
A summary of the Rockwell command set for your MIU modem is
provided in Book 2.
Unless otherwise specified at the time of order, your modem will have left
the Telenetics factory in the configuration detailed on the following pages.
The Telenetics factory configuration differs from the Rockwell default
configuration as follows...
&C0 Rockwell Default Carrier Detect (CD) always ON.
&C1 Telenetics Factory Carrier Detect (CD) only ON
when modem connected (on hook)
S0=0 Rockwell Default Auto-Answer OFF
S0=1 Telenetics Factory Auto-Answer on first ring
You can review the configuration of your modem by entering AT&V
.
You can restore the Rockwell factory configuration by entering
AT&F&W