Toshiba DVD Video Player SD-V394SU - Manual (Page 36)

36
Recording (VCR)
One-touch Timer Recording (OTR)
The One-touch Timer Recording feature provides a simple and
convenient way to make a timed recording.
One-touch Timer Recording (OTR)
Press
once
twice
3 times
4 times
5 times
NORMAL REC
0:30
1:00
1:30
2:00
3:00
4:00
5:00
6:00
NORMAL REC
Recording time Press
6 times
7 times
8 times
9 times
10 times
Recording time
Load a cassette tape with the erase
prevention tab intact.
The VCR will automatically turn on.
1
Press SP/SLP to select the desired tape speed
SP or SLP.
The tape counter and “SP” or “SLP”
will appear on the screen for about 4
seconds.
2
Set “TV” or “CABLE” option to the
appropriate position
27 .
3
00 : 00 : 00 SP
+0
CH 110
INDEX
OTR 0 : 30
TV - VHF/UHF channels
CABLE - Cable TV channels
Press Direct channel selection buttons (0–9) or
CH +/– to select the channel to be recorded. 4
Press REC/OTR. Recording begins. Press the
button again to stop recording after 30 minutes.
Each additional press of REC/OTR will increase
recording time as shown in the chart below, up
to a maximum of 6 hours. 5
To cancel OTR
Press STOP or turn off the power.
“ ” will appear on the screen for about 4 seconds.
Note:
If you wish to watch the DVD playback during OTR or standard
recording, press VCR DVD selector to change to DVD mode and
perform the DVD playback
42 .
0–9
CH +/–
REC/OTR
SP/SLP
VCR DVD
STOP
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR mode indicator will light.)
Example: One-touch Timer Recording for 30 minutes.
The OTR and recording time will
appear on the screen for about 4
seconds, then change to “ ”.
2I30101B-En_p32-37 1/12/06, 17:05 36