Toshiba 32A62 - Manual (Page 17)

17
W
elcome to Toshiba
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
Selecting the signal source
Use the TV/VIDEO button on the remote control or TV to select the
signal source connected to your TV.
• Pressing TV/VIDEO on the remote control displays the current
signal source in purple. Press 0–4 to select the source.
0–4: TO SELECT
0: TV
1: VIDEO 1
2: VIDEO 2
3: VIDEO 3
4: ColorStream
• Pressing TV/VIDEO on the TV changes the current signal source.
Repeatedly press the button to select the source.
To verify the signal source:
Press the TV/VIDEO button on the remote control once. The
current signal source displays in purple.
Programming channels into the TV’s memory
When you press CHANNEL ▲▼ on the TV or remote control,
the TV stops only on the channels stored in the TV’s memory.
Note: To tune the TV to a channel not programmed into the memory,
use the CHANNEL NUMBERS on the remote control.
Follow the steps below and on the next page to program channels into
the TV’s memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area
and store them in the TV’s memory. After the channels are stored
automatically, you can manually add or erase individual channels
(see page 18).
To program channels automatically:
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press y or z to highlight TV/CABLE.
4. Press x or • to highlight TV (if you use an antenna) or CABLE (if
you use cable).
5. Press z to highlight CH PROGRAM.
MOVE SELECT [ ] [ ]
LANGUAGE:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH] FRANCAIS ESPANOL
[TV] CABLE
[ADD] ERASE
SET UP
MOVE SELECT [ ] [ ]
LANGUAGE:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH] FRANCAIS ESPANOL
[TV] CABLE
[ADD] ERASE
SET UP
6. Press x or • to start automatic channel programming (“CH
PROGRAM” displays on-screen). The TV automatically cycles
through every TV or cable channel (depending on which you
selected), and stores all active channels in the TV’s memory.
7. When automatic channel programming is complete, the message
“CH Programming Completed” appears.
8. Press CHANNEL ▲▼ to view the programmed channels.
(Continued on next page)
MENU y z x •
TV/VIDEO
CHANNEL y z
MENU TV / VIDEO VOLUME CHANNEL POWER
CH RTN
ADV/
PIP CH
ADV/
PIP CH
LIGHT
MUTE TV/VIDEO TIMER
RECALL POWER
TV
CABLE
VCR
ENT
ENTER FAV FAV
C.CAPT
EXIT
MENU
RESET
1
4
2
5
3
6
7 8 9
0 100
Channel
Numbers
MENU
TV/VIDEO
CH CH (Channel)
VOL