Toshiba TEC SL-9000N-FFH-QR - Manual (Page 27)

10. PROGRAMMING PROCEDURES
10.2 PLU DATA SETTING
10- 6
NOTES:
1. A UPC code is made up of a combination of an entered code and an AUTO CODE. Be sure to
attach some characters to the end of the AUTO CODE, or all entered codes will be ignored
and an AUTO CODE will become an UPC code (see ex. 1).
ex. 1)
enter code: 456 ex. 2) enter code: 4567 ex. 3) enter code: 123456
AUTO CODE: 123- - - AUTO CODE: 123- - - AUTO CODE: 987
code#: 123456 code#: 123567 code#: 987
2. When there is no area to store PLU data, an error occurs when pressing the key.
3. Changing a PLU # to the number to which other PLU data is set will result in an error.
4. Unit price flag may be selected as follows:
1) In case of lb scale
a. key : $ per lb
b. key : $ per 1/2 lb
c. key : $ per 1/4 lb
2) In case of kg scale
a. key : $ per 100 g or Kg
5. Tare limit should be a multiple of 5, up to 2.000 lb for US type and a multiple of 2, up to 1.000 Kg
for CA/QR type.
6. Safe handling instructions can be printed on 57-mm wide labels only. Safe handling
instructions are printed on labels formatted for ingredient messages. Only ingredient
message labels with 13 or more lines can be used to print safe handling instructions.
Available print formats are as follows:
13 (63), 15 (65), 16 (66), 23 (73), 25 (75), 26 (76), 33 (83), 35 (85), 36 (86), 41, 42, 43, 48 and
49.
7. Tare % indicates a percentage of tare in gross weight, which is available when the Initial Setting
#8-7 is set to 1 (SL-9000) or #28-4 is set to 1 (SL-9000N).
8. When setting open prices in the count mode (Initial Setting #1-6: 1), set zeros as quantity and
unit price.
ENTER
INSERT 1
DELETE (A) 1/2
RETURN 1/4
INSERT 1
Pressing the key instead of the key advances to the next menu. Pressing the
key returns to the preceding menu.
Verification label of PLU data
ENTER
(C: Compulsory,
Blank: Not compulsory)
(W: Weigh, F: Fix, B: By-count)