Topcom Shiatsu SFM-1000H - Manual (Page 7)

TOPCOM SFM-1000H 7
TOPCOM SFM-1000H
ENGLISH
6 Technical data
7 Cleaning
• Disconnect the device and allow it to cool down.
• Clean it with a soft cloth or slightly damp sponge.
• Never allow that water or any other liquid enters the device or accessories.
• Never use abrasive cleaners, brushes, gasoline, kerosene, glass polish or paint thinner to clean.
• The fabric, covering the massage mechanism, can be removed by carefully opening the zipper
(! the zipper is installed inverse to avoid injuries).
• Do not machine wash the fabric. Hand wash only. Do not wring or spin. Do not iron.
8 Storage
• Do not wrap the power cord around the unit before storing.
• Store the unit in its original box and in a safe, dry and cool place. Store it out of the reach of
children.
• Avoid contact with sharp edges or pointed objects as this might damage the unit.
9 Disposal of the device (environment)
At the end of the product lifecycle, you should not throw this product into the normal
household garbage but bring the product to a collection point for the recycling of electrical
and electronic equipments. The symbol on the product, user guide and/or box indicate this.
Some of the product materials can be re-used if you bring them to a recycling point. By re-
using some parts or raw materials from used products you make an important contribution
to the protection of the environment. Please contact your local authorities in case you need more
information on the collection points in your area.
d. Heat function
• Press the heating button on the main unit or remote control to activate
the infrared heating LED’s.
• Press the button again to stop the heating.
e. Shutting off
• Press the stop button on the main unit or remote control to stop the
massager.
• If you forgot to switch off the massager, there is a 15-minute auto shut-off
on the unit for your safety.
• When the massager is switched off, the massage mechanism will always
return to its initial position.
• Disconnect the unit from the main power.
Dimensions (W/H/D)
Weight
Power supply - main unit
– Input:
– Output:
Power supply remote control
550 X 390 X 250 mm
7.5 Kg
100-240 V AC / 50-60 Hz
DC 24 V / 2,5 A
2 x AAA (1,5 V)