Turbosound TCX-12 - Manual (Page 7)

Quickstart Guide 7
Use with Speaker Poles and Speaker Stands
Use speaker poles such as the PA-90 or PA-100 on top of a bass cabinet
to raise the mid/high cabinets to above head height for better audience
coverage. For portable use remove the plastic bung covering the pole
mount socket. Fit the speaker pole into the pole mount socket on the TCX
bass cabinet and mount the TCX two-way cabinet to the top of the pole.
Always use caution when lifting the loudspeaker.
Wall Brackets
1. Separate the component parts of the bracket into the wall plate and
speaker plate assemblies by removing the nylock nut underneath
the wall plate horizontal lug.
2. Remove the countersunk bolts on the rear panel of the cabinet and
attach the speaker plate to the cabinet with the bolts supplied.
3. Fix the wall plate in the venue using appropriate fixings
(not supplied), ensuring that the cable access hole is towards the top.
4. Lift the loudspeaker on to the wall plate and locate the large
captive bolt welded to the speaker plate through the wall plate lug.
Re-assemble the bracket parts, adjust the aim of the loudspeaker
and tighten all bolts.
Ceiling Brackets
1. Separate the component parts of the bracket into the ceiling plate
and speaker plate assemblies by removing the nylock nut underneath
the wall plate lug.
2. Remove the countersunk bolts on the rear panel of the cabinet and
attach the speaker plate to the cabinet with the bolts supplied.
3. Fix the ceiling plate in the venue using appropriate fixings
(not supplied). Lift the loudspeaker on to the ceiling plate and
re-assemble the bracket fixings, adjust the aim of the loudspeaker
and tighten all bolts.
Pole Brackets
TCX series mid-high cabinets equipped with a recessed pole mount socket can be wall mounted with
the generic PB-55 pole bracket. Fix the bracket in the venue using appropriate wall fixings, mount the
loudspeaker on to the spigot, and aim the loudspeaker as required. Tighten the pole bracket grub screw to
lock the loudspeaker and prevent unauthorised removal.
Illustrated: TCX-15 on a WB-55 wall bracket
Illustrated: TCX-12 on a CB-55 wall bracket