Thecus Technology 1U4500R - Manual (Page 30)

30
System Snapshots
This function will create snapshots of all your share folders. The snapshot
versions will be time stamped.
Snapshot
Item Description
Manual
Press to manually create a snapshot.
Schedule Create snapshots at designated intervals.
To schedule a snapshot at designated times, press the Schedule button and set
your desired snapshot options:
Item Description
Automatically remove
oldest snapshot
When a snapshot is created and it is over the system limit. The
oldest snapshot will be removed automatically to make room for
the new snapshot.
Enable snapshot
schedule
To Enable scheduling mechanism of snapshot.
Monthly To create a snapshot using a monthly interval.
Weekly To create a snapshot using a weekly interval.
Daily To create a snapshot using a daily interval.
Network Management
Use the Network menu to make network configuration settings as well as service
support settings.
WAN Configuration
From the Network menu, choose WAN,
and the WAN Configuration screen
appears. This screen displays the network
parameters of the WAN connection. You
may change any of these items and press
Apply to confirm your settings. See a
description of each item in the following
table:
WAN Configuration
Item Description
Host name
Host name that identifies the 1U4500 on the network.
Domain name Specifies the domain name of the 1U4500.
MAC Address MAC address of the network interface.
Jumbo Frame Support Enable or disable Jumbo Frame Support of the WAN interface on
your 1U4500.
DHCP Enable or disable the 1U4500 from obtaining in IP address via
DHCP server. If you require a static IP, disable this feature and
WARNING
This operation will cause heavy loading on your RAID system. If your RAID is
degraded, please disable this function and replace damaged disk as soon as
possible.