Thermador T24IF - Manual (Page 23)

23
Changing the
bulb
d WARNING d
To avoid electrical shock which
can cause severe personal injury
or death, disconnect power to
appliance before making repairs.
After making repairs, reconnect
power.
q Switch off the appliance with
the POWER button!
CAUTION
Never touch a halogen bulb with
bare fingers.
When inserting a glass halogen
bulb, always hold with a soft
cloth.
We recommend that a service
technician changes the bulb.
Halogen bulbs above
Halogen bulb type:
20 W/12 V/bulb holder G4
q Release and remove the cover.
q Pull out the defective halogen
bulb.
q Insert a new halogen bulb.
Touch the halogen bulb with a
soft cloth only.
q Attach the cover to the clip and
lock into position.
Service
If you need service, first see the
"Troubleshooting" section of this
book. After checking "TroubleĆ
shooting," additional help can be
found by calling the Thermador
Customer Interaction Center,
1-800-735-4328 (tollĆfree), from
anywhere in the U.S.A. In Canada,
contact your designated Thermador
Canada service company or call
1-800-735-4328 .
Write down the following information
about your freezer to better help you
obtain assistance or service if you
ever need it.
You will need to know your complete
model number and serial number.
You can find this information on the
model and serial number label
located on the inside wall of the
freezer compartment.
Dealer name:
Address:
Phone number:
Purchase date:
Model number:
FD number:
Serial number:
Type: