beautypg.com

Tape player, Playing a tape, Recording – Technicolor - Thomson Thomson Life CS300 User Manual

Page 13

background image

9

EN

Tape Player

Playing a Tape

1. Press

SOURCE on the main unit repeatedly or

TAPE on the remote to enter Tape mode.

2. Press on the PUSH OPEN/CLOSE area of the

cassette door to open it.

3. Insert a tape into the door and push the door

closed. VFD will display “CA 0000”.

4. Press SKIP BACKWARD or SKIP

FORWARD

on the main unit to rewind

and fast forward tape to position the tape to the
desired starting position.

5. Press

PLAY/PAUSE

to begin playback.

Press again to pause playback.

Recording

From Tuner

1. Insert a tape into deck.

2. Press

SOURCE repeatedly on the main unit or

TUNER on the remote control to select
Tuner (TU).

3. Press BAND/APP to access the desired band.
4.. Press SKIP FORWARD

or SKIP

BACKWARD on the main unit or
TUNING -

or +

on the remote control

to tune to the station to be recorded.

5. Press

REC •II to enter Record standby. Press

again to begin recording.

6. press

STOP to end recording.

From CD

1. Insert a tape into deck .
2. Press

SOURCE repeatedly on the main unit to

select CD then press DISC SKIP or DISC1 / DISC2
/ DISC3
to select the disc to be recorded.

3. Press

SKIP FORWARD

or SKIP

BACKWARD

on the main unit or

TUNING -

or +

on the remote control

to select the track to be recorded.
or Press PROG•SET to enter program mode.

4. Press

REC •II to enter Record standby. Press

again to begin recording.

5. press

STOP to end recording.

From AUX

1. Insert a tape into tape deck.
2. Check that the auxiliary device has been

connected correctly to the AUX connector on the
back of the system.

3. Start playback on the auxiliary device.
4. Press REC•II to enter Record standby. Press

again to begin recording.

5. Press STOP to end recording.

CS300 EN 11/20/02 10:19 AM Page 13