Topcom 2500 - Manual (Page 7)

7
Topcom Baby Viewer 2500
EN
GLISH
5.7 Melody function
You can remotely activate a melody broadcasted on the baby-unit.
•
Press the Melody start/stop button (10) to active the melody. The active melody is
displayed on the parent unit.
• Press the melody select button (9) to switch between 3 different melodies or to select
‘Melody repeat all’ to play the melodies successively.
• Press the Melody start/stop button (10) to deactive the melody.
6 Disposal of the device (environment)
At the end of the product lifecycle, you should not throw this product into the
normal household garbage but bring the product to a collection point for the
recycling of electrical and electronic equipments. The symbol on the product, user
guide and/or box indicate this.
Some of the product materials can be re-used if you bring them to a recycling point. By re-
using some parts or raw materials from used products you make an important contribution to
the protection of the environment.
Please contact your local authorities in case you need more information on the collection
points in your area.
Remove the batteries from the unit before disposal.
Dispose of batteries at a designated battery disposal unit and not in the household
waste.
7 Cleaning
Clean the device with a slightly damp cloth or with an anti-static cloth. Never use cleaning
agents or abrasive solvents.
8 Specifications
Parent unit
Frequency
Maximum range
Modulation
Display
Display colors
Brightness control
Dimensions
Weight
Power
Operation temperature
2,4GHz
150M Line of Sight
GFSK,FHSS
2,36’’ TFT LCD
Full-color
5 steps
6,6(W)x14,5(H)x4,1(D) cm
120g
DC 6V, 800mA + Li-ion
battery (charging function)
0°C ~40°C
Baby unit
Frequency
Modulation
Image sensor
Lens
IR LED
VOX
Dimensions
Weight
Power
Operation temperature
2,4GHz
GFSK,FHSS
Color CMOS
f 6.0mm, F 2.0
9 pcs
Voice activation
8,9(W)x10,7(H)x8,2(D) cm
175g
DC 6V, 800mA or 4 x AAA
batteries (no charging function)
0°C ~40°C
This product is in compliance with the essential requirements and other
relevant provisions of the the R&TTE directive.
The Declaration of conformity can be found on:
http://www.topcom.net/cedeclarations.php