Topcom 2500 User Manual

Page 5

Topcom Baby Viewer 2500

GLISH

4.2

Baby unit power supply

1. Connect the small plug of the AC adaptor to the Baby unit and the other end of the

adapter cable to the electric socket (230V/50Hz).
Only use the enclosed adapter (6V DC / 1,75A).

2. Slide the Power switch (26) to the ON position. The LED (24) on top of the camera

should light up green.
Slide the Power switch (26) to the OFF position to turn off the baby unit.

4.3

Parent unit battery Installation

1. Turn the belt clip facing upwards.
2. Press the battery cover and slide it downwards.
3. Install the rechargeable battery pack (3,7V Li-ion)

following the polarity as shown. Ensure that the
metal contacts touch the contact in the unit.
Close the battery door.

4. Turn the On/Off/Volume switch (15) counter

clockwise to turn the unit on and change to the
desired audio volume.
Turn the On/Off/Volume switch (15) clockwise to
turn the parent unit off.

4.4

Parent unit power supply

1. Connect the small plug of the AC adaptor to the parent unit and the other end of the

adapter cable to the electric socket (230V/50Hz)

2. Turn the On/Off/Volume switch (15) counter clockwise to turn the unit on and change to

the desired audio volume.
Turn the On/Off/Volume switch (15) clockwise to turn the parent unit off.