Tricity Bendix TBWM 1110 - Manual (Page 9)

9
“softener”
Hand washed cotton garments can be softened with this
programme. The machine performs 1 rinse, followed by
a final spin at the max. speed, which can be reduced by
depressing the “spin” button.
“drain”
For emptying out the water of the last rinse in
programmes with the “rinse hold” option or at the end
of the Soak 30 programme.
Turn first the programme selector dial to “off”, then
select “drain” programme and press the “start/pause”
button.
“spin”
Separate long spin at the maximum speed for hand
washed cotton garments.
“mini 30”
This is a complete programme that can be combined
with the following options: “spin” reduction and “rinse
hold”. To be used for laundry which is lightly soiled or
which needs freshening up. Max load: 2 kg. Washing
temperature: 30°C, programme duration: 30 minutes,
final spin speed: 700 r.p.m.
“off”
To reset a programme turn the selector dial to “off”. A
new programme can now be selected.
Operating Sequence
Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment
of
the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 95°C, without any laundry in
the machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent and start the machine.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
.
If you have selected the prewash option or the soak 30
programme, pour detergent into the wash compartment
into the compartment marked
.
P0004
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
“MAX” mark in the drawer). Close the drawer gently.
3. Switch the machine on
To switch the machine on, press the “on/off” button: the
mains-on light comes on.
4. Select the required programme
Turn the programme selector dial to the desired position.
on/off
P0005
P0006