Tricity Bendix TBWM 1110 - Manual (Page 6)

1 Detergent dispenser drawer
2 Mains-on light
This light comes on when the “on/off” button is
pressed, and goes out when it is pressed again.
3 “On/Off” button
Press this button to switch the machine on. Press it
again to switch the machine off.
Programme Option buttons
Depending on the programme, different functions can
be combined. These must be selected after choosing the
desired programme and before pressing the
“start/pause” button.
When these buttons are pressed, the corresponding pilot
lights come on. When they are pressed again, the pilot
lights go out.
If an incorrect option is selected, the corresponding
pilot light flashes for a few seconds.
4 “spin” button
Press this button to reduce the maximum speed of the
final speed proposed by the machine for the selected
programme or to select position “rinse hold” .
The light corresponding to the selected option
illuminates.
The following speeds are available for the different
fabrics:
• Cottons, linen: 500/700/900 max 1100 r.p.m.
• Synthetics and wool/(handwash)
:
500/700 max 900 r.p.m.
• Delicates and mini 30:
500 max 700 r.p.m.
6
The Control Panel
1 2 3 4 5 9 6 7 8 10 11
1 1 0 0
prewash
wash
rinse
rinse hold
drain
spin
filter
end
start/
pause spin quick on/off
extra
rinse
900
700
500
1100
TBWM 1110
A U T O W A S H
PROGRAMME
rinse
hold
prewash
easy
iron
off
cottons
synthetics
30°
40°
30°
95°
E60°
E95°
E40°
30°
40°
30°
40°
delicates
60°
E60°
40°
soak 30
drain
rinses
spin
softener
mini 30
wool
Rinse Hold
When rinse hold option is selected, the last rinse water
is not emptied out, to prevent the fabrics from creasing.
When the programme has finished, the door is locked,
the light of the “start/pause” button goes off, the pilot
lights “end” and “rinse hold” in the programme
progress display are alight to indicate that the water
must be emptied out.
There are two methods of draining the water from the
machine.
Method 1: Drain the water only, no spin:
• Turn selector dial to "off" position.
• Select the programme “drain”.
The water will be emptied out without spinning.
Method 2: Drain and then spin the laundry:
• Turn selector dial to “off” position.
• Select programme “Spin”.
• Select the required spin speed (see 4 spin speed
button)
• Press Start/Pause button
The water will empty out and then the laundry will be
spun at the selected spin speed.
Attention! Before selecting programmes “Drain” or
“Spin”, the selector dial has to be positioned on “off”
(cancelling).
5 “quick” button
This option can be used for lightly soiled cottons,
synthetic or delicate items that have been used or
worn for a short time.
This option is not available with the wool/(handwash)
programme
, the Energy saving programmes (E95°,
E60° and E40°) and Mini 30.