Toshiba SD-M1201 - Manual (Page 4)

4
If you are replacing your CD-ROM: connect DVD-ROM to the SCSI
interface connector that the CD-ROM was connected to.
If DVD-ROM is not replacing a CD-ROM or is an addition to a CD-ROM:
daisy-chain the DVD-ROM drive with a custom built SCSI interface cable
(not supplied with kit). See Daisy-Chaining Section on page 5 for more
information.
Power Cable - Connect an internal computer power supply cable to the
power socket at the back of the DVD-ROM. One side of the plug has
chamfered edges, so the power connector fits only one way. Push plug
completely into the socket making sure the plug fits correctly.
Audio Cable (optional) - If you have a sound card and speakers, and
would like to play audio CDs on your computer, you will need to get a
sound cable. Contact AMC, our small parts supplier, at 888/262-9700.
Sound cables are made for the sound card you are using and the DVD-
ROM to which you are connecting. Make sure you have this information
when purchasing a sound cable. The sound cable connects to your sound
card at one end and the other
end connects to the digital
audio connector at the left rear
of the DVD-ROM (see DVD-
ROM Back Panel photo on
page 7 for location). Refer to
the instructions which came
with your sound card for de-
tails on any sound-driver soft-
ware required. Also refer to
the REALmagic Hollywood+
User’s guide for additional
audio connection options.