Setting the recording time and clock, Setting the answering machine, Setting the recording time – Toshiba SG-1991 User Manual
Page 42: Setting the clock
SETTING THE ANSWERING MACHINE
43
Answering System
SETTING THE RECORDING TIME
Select one of two maximum recording
times or Announce Only by sliding the
REC TIME switch on the side of the base
unit.
1:
1 minute
4:
4 minutes
ANN (Announce Only): If you set the switch to ANN, the selected
OGM will be announced and no message will be accepted. The LED
display shows "A".
SETTING THE CLOCK
The answering machine announces the day and time that each
message was recorded during a play back.
1
Press and hold
till a beep sounds.
2
Select the day of the week by pressing
or
. When
the correct day is announced (corresponding to the number on the
LED display), press
.
3
Select the Hour by pressing
or
. When the correct
number (
-
) appears on the LED display, press
.
4
Select the Minute by pressing
or
. When the correct
number (
to
) appears on the LED display, press
.
5
Select AM/PM by pressing
or
. At the correct
display (
or ), press
.
You hear a long beep and the new day and time.
NOTES:
• You can hear the time currently set by pressing
.
• If you do not complete the setting procedure within 2 minutes, the setting
procedure is cancelled
.
TIME
TIME
SKIP
REPEAT
TIME
SKIP
REPEAT
TIME
SKIP
REPEAT
TIME
SKIP
REPEAT
TIME
RING TIME
REC
TIME
2/4/TS
ANN/4/1
REC TIME switch
SG-1991.qxd 7/4/1 7:29 PM Page 43