Toshiba SG-1991 - Manual (Page 24)

24
BASIC OPERATION
• If button is pressed while talking on an outside line, this line
is put on hold and the intercom can be used between the handset and the
base unit. Moreover, if the calling side (either the base unit or the handset
which initiated the intercom) quits the intercom conversation by pressing
or button, the line put on hold by the calling side is
automatically transferred to the beeped side.
• If a call from an outside line is received while the intercom is calling, the
intercom calling status is canceled and the phone rings. You can answer the
call after quitting the intercom conversation.
TRANSFERRING AN INCOMING CALL
You can transfer an incoming call from the handset to the base unit, or
from the base unit to the handset.
FROM THE HANDSET TO THE BASE UNIT:
1
To transfer the call, press button on the handset
while speaking.
The call is placed on hold and the base unit beeps.
The LCD displays the following message:
2
Press or button to answer
on the base unit.
3
To complete the transfer, press button to disconnect the
handset.
FROM THE BASE TO THE HANDSET:
1
To transfer the call, press button on the base unit while
speaking.
The call is placed on hold and the handset beeps.
The LCD displays the following message:
2
Press or button to
answer the call on the handset.
3
To complete the transfer, press button to disconnect the
base unit.
SPEAKER
DELETE/INTCOM TALK
INTCOM
TALK
INTCOM SPEAKER
DELETE/INTCOM
TALK SPEAKER
DELETE/INTCOM
Basics
Hold
Paging Base
Hold
Paging
SG-1991.qxd 7/4/1 7:29 PM Page 24