Toshiba 30HFX85 - Manual (Page 23)

23
Appendix
Using the TV
’s
Features
Setting up
your TV
Using the
Remote Control
Connecting
your TV
W
elcome to
T
oshiba
Important
Safeguards
Learning about the remote control
The buttons used for operating the TV only are described here.
For a complete list of the remote control’s functions, see the “Remote
control functional key chart” on pages 17-18.
POWER turns the TV on and off
SLEEP allows access to the automatic TV shut-off function (page 40)
LIGHT The first press of the LIGHT button lights the keypad and turns
on the Illumination mode. With the Illumination mode on,
pressing any other key lights the keypad for 5 seconds
(10 seconds if you’re in programming mode).
Subsequent presses of the LIGHT button toggle between
turning the Illumination mode on and off.
CHANNEL NUMBERS (0-9, 100) allow direct access to channels (page 26)
MODE cycles through the six device modes: TV, CABLE/SAT, VCR,
DVD, AUDIO1, and AUDIO2. The mode indicator light will
remain lit for a few seconds (page 19).
PIC SIZE cycles through the five pictures sizes: Natural, TheaterWide
1, 2, 3, and Full (page 34)
MENU allows access to on-screen programming menus (page 24)
ENTER sets programming menu information (page 24)
5∞` select or adjust programming menus (page 24)
FAV
5∞ cycles through favorite channels (page 26)
CH 5∞ cycles through programmed channels (page 26)
VOL 5∞ adjusts the volume level
EXIT exits the programming menus (page 24)
INPUT selects the video input source (page 32)
MUTE mutes the sound (page 41)
RECALLdisplays on-screen information (page 43)
CH RTN returns to the last viewed channels (page 26)
Using the
Remote Control
J3S40321A(E)_P16-26 12/07/2005, 8:41 AM 23