Introduction – Telex BP-1002 User Manual
Page 5

Introduction 1
CHAPTER 1
Introduction
WARNING:
If you have a BP-1002/2002 with a 9030-7740-XXX circuit board,
you will need to obtain Revision H of this user manual.
The Audiocom
®1
BP-1002 and BP-2002 are microprocessor controlled one- and
two-channel intercom beltpacks. An internal switch and jumper setting allows the
units to be used with Clear-Com
®2
components, if desired. Other internal switch and
jumper settings allow the unit to be uniquely configured to the operator’s
requirements.
1. Audiocom
®
is a registered trademark of Telex Communications, Inc., Burnsville, MN
55337.
2. Clear-Com
®
is a registered trademark of Clear-Com Intercom Systems.
This manual is related to the following products: