Toshiba 27AF53 - Manual (Page 17)

17
Appendix
Using the TV
’s
Features
Setting up
your TV
Using the
Remote Control
Connecting
your TV
W
elcome to
T
oshiba
Important
Safeguards
Adding channels to the TV’s memory
Your TV will stop on specific channels that are stored in the TV’s
channel memory when you press Channel
▲ or ▼. Use the steps
below to set all active channels in your area automatically.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press or to display the SETUP menu.
2. Press
▲ or ▼ until the TV/CABLE
selection is highlighted.
3. Press or to highlight either
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press ▼ to select CH PROGRAM.
5. Press or to start channel programming. The TV will automati-
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
“PROGRAMMING NOW-PLEASE WAIT” appears.
6. When channel programming is complete, the message “COMPLETED”
appears.
7. Press CH ▲ or ▼ to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or
erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If adding channels, you must select the channel to add using the
Channel Number buttons.
2. Press MENU, then press or
to display the SETUP menu.
3. Press ▲ or ▼ to highlight ADD/
ERASE.
4. Press or to select ADD or
ERASE, whichever function you
want to perform.
5. Repeat steps 1-4 for other
channels you want to add or erase.
Changing channels
To change to the next programmed channel:
Press Channel ▼ or ▲ on the TV or CH ▲ or ▼ on the remote
control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100) on the remote
control.
For example, to select channel 125, press 100, 2, 5.
Menu
Exit
PICTURE AUDIO SETUP
CH
OPTION MODE
CH PROGRAM
ADD / ERASE
START
ADD
SELECT ADJUST
TV / CABLE TV CABLE
CLOSED CAPTION OFF
PICTURE AUDIO SETUP
CH
OPTION MODE
CH PROGRAM START
SELECT ADJUST
TV / CABLE CABLE
ADD / ERASE ADD ERASE
CLOSED CAPTION OFF
Channel ▲▼
Channel
Numbers
Setting up
your TV
3N10201A/E P07-17 15:8:03, 10:47 17