TDK Dualeta iQA Series - Manual (Page 3)

Advance Data Sheet: Dualeta™ iQA Series – Dual Quarter Brick
©2001-2005 TDK Innoveta Inc.
iQAFullDatasheet080505 2.doc 8/3/2006
℡ (877) 498-0099 3/19
Mechanical Specification
Dimensions are in mm [in]. Unless otherwise specified tolerances are: x.x
± 0.5 [0.02], x.xx and x.xxx ± 0.25 [0.010].
Recommended Hole Pattern:
(top view)
Pin Assignment:
PIN FUNCTION PIN FUNCTION
1 Vin (+) 5 Output RTN
2 On/Off (-) 6 Vo1 Trim (Optional:
Single tracking trim pin)
3 Vin (-) 7 Vo1 (+)
4 Vo2 (+) A Vo2 Trim (Optional: Omit
for single trim pin option)