E xplug control installation, Installation to web server – TRENDnet TV-IP100-N User Manual
Page 107
106
E Xplug Control Installation
Installation to Web Server
1. Installation:
Copy the “xplug.ocx” file to any WEB Server table.
2. Setting (Configuration):
From the Web Configuration menu select “System” and
under the “Loading ActiveX From” input web server
location
(http://www.web server location.com/).
Once the settings are completed, the user now is able to access the
Camera from the web browser by selecting the image view –
ActiveX mode.
Important Information
It is highly recommended to install the Xplug Control
application to the Web Server for IE 5.0. It must be
installed to a Public Domain with Fixed IP address.