2 sorting channels, 3 blocking channels – TechniSat TechniBox VIACAM User Manual

Page 32

New channels added to the User List will be positioned at the end of the list, and can then be
sorted to any desired position.

7.2 Sorting Channels

In order to sort the User List of channels according to your own preferences, proceed as fol-
lows:
>

Use the

key to display the

Main Menu

Use the

up/down arrow

keys to mark

TV Programmes

, if you wish to sort TV

channels, or

Radio Programmes

, if you wish to sort radio stations.

Confirm with the

key.

The sub-menu

>Programmes

will be displayed.

Now use the

up/down arrow

keys to mark the entry

Sort.

Confirm with the

key.

The

User Channel List

will be displayed.

Use the

up/down arrow

keys to mark a channel whose position in the list you want

to change.

Confirm with the

key.

Now you can use the

up/down arrow

keys to place the marked channel at any

position in the list where you would like it to be.

Use the

numeric

key pad to enter the position in the list where you would like the

channel to appear. The channel number will be displayed on the menu.

Use the

key to insert the channel at the preferred position.

Repeat this process until the list conforms to your preferences.

Press the

key to return to normal operation.

7.3 Blocking Channels

You have the facility to block specific channels (parental lock). A blocked programme will
only be shown on the TV screen if you enter your personal PIN after selecting the channel.
This number need to be entered only once during an operating session, i.e. the blocking will
only become operative again the next time the receiver is switched on (standby).
In order to block a specific channel, follow this procedure:
>

Press the

key to display the

Main Menu

Use the

up/down arrow keys

to select

TV Programmes

, if you wish to block

viewing of TV channels, or

Radio Programmes

if you wish to block radio stations.

Confirm with the

key.

The sub-menu

>Programmes

will be displayed.

Use the

up/down arrow

keys to mark the entry

Lock

Confirm with the

key.

The

User List

will be displayed.

Use the

arrow

keys to mark the channel/station you wish to have blocked.

Confirm with the

key

The channel will be marked with a red cross in the list.

You can repeat this process as often as required to block all channels you wish to
block.

Press the

key to return to normal operation.

In order to activate the parental control function, you must still enter

your personal PIN in the following point Changing the PIN, and then

activate the parental lock as described in Point 5.2 (Basic Settings)

bed_anl_ViaCam_engl_2.qxd 30.03.01 14:21 Seite 32