Tanita HD-338 - Manual (Page 10)

10
Troubleshooting
“Err” appears on the display
You stepped on the scale before “0.0” appeared on the display.
Wait until “0.0” appears, then step on the scale.
“- EE -” appears on the display
Reading cannot be obtained if the weight capacity is exceeded.
“- - - -” appears on the display
If it is during weight measuring process, there is no memory of your personal
data. Please program your personal data.
“LO” appears on the display
Lithium batteries are low. Please change the batteries immediately.
00% is shown in Goal
You over-achieved your goal. No % in Goal will be displayed.
% are displayed in Goal but nothing is in Step
This happens when the difference between your goal weight and initial
weight is less than 10 lb or 5 kg.